Hathaway

Gluing Equipment & Gum Labels These products are not available in our online store. Please call 513-621-1052 or click here to contact us for purchasing information.
	Label-Pro 5.5 The Label Pro® 5.5 can glue labels up to 5.5" wide (14 cm) quickly and neatly. It is the world’s most compact label gluer! A corduroy pattern of adhesive is applied across the entire label, reducing adhesive consumption by up to 50%! It is available with or without a motor (120 & 220 volts). When a label is fed into the motorized gluer, the motor turns on pulling the label through the gluer. The motor stops one second after the label exits, reducing wear and tear and increasing the pot life of the adhesive.

	Captain B Label Gluer The Captain B is a rugged label gluer available with 8", 10", and 14" (20, 25, 40 cm) roller widths. It’s removable glue tray means easy access and cleanup. The gear motor is fully enclosed with direct drive for safe operation. The built-in speed control (standard on the 120 volt gluer, optional on the 220 volt gluer,) increases its ease of use. Options include: An explosion proof air motor for use in hazardous environments. Strip gluing to reduce adhesiveconsumption. A pressure bar attachment for gluing rigid or thick board stock or envelopes.

	Edge Gluer The Edge Gluer is available in our #2 & #4 models with the ability to glue up to 2" (5 cm) and 3.25" (8 cm) of an edge of a piece of paper, chipboard, cardboard, corrugated, or wood up to 5/8" thick ((16 mm). The 120 volt motor comes standard with variable speed control, providing flexibility to work with any edge gluing job. We have 220 volt motor & speed control available as options.


The Colonel Electric Label Gluer The Colonel label gluer is available in 20" and 32" roller widths. It is typically used for gluing/mounting large paper labels, four color litho labels or poster prints. The Colonel’s heavy duty double roller system means precise glue film control. Standard features include: Variable Speed Control Large Removable glue tray Heated glue tray with thermostat for use with animal glues or in cold environments Table top, 120 volt machine Options include: Strip gluer attachment Pressure Bar Attachment for rigid/thick materials up to 5/8" (16 mm) thick 220 volt motor		The Adjutant Label/Laminating Press The Adjutant is used to smooth the glued label/board stock combination to insure that there are no air bubbles or wrinkles. It is available in 20", 32", and 42" roller widths. After placing the label through the Colonel gluer, the glued label is then placed on flat board stock. The combined label/board is fed through the Adjutant Press which features an upper rubber roller and a lower metal roller. The label/board is then placed in a stack to dry. When the Colonel gluer, Adjutant Press, and our lay flat products (such as GF#637 glue and GF #876 adhesive) are used in combination you have the Wrinkle Tamers. It's a team that cannot be beat!
*Click to contact us for additional info*

Hathaway Stamp & Identification...your source for virtually any identification product!
	Home \| About Hathaway \| Entrance to Online Store \| Contact Us